diff --git a/README.md b/README.md
index 78f73d4..8f21648 100644
--- a/README.md
+++ b/README.md
@@ -6,9 +6,6 @@ Best way to start off is install KDE first and make changes.
 
 These dotfiles are managed by [chezmoi](https://www.chezmoi.io/).
 
-> [!IMPORTANT]
-> This repo will be moved to https://git.envs.net/gb/hyprdots. The original one is still available, but it will receive updates less frequently.
-
 > [!WARNING]
 > Since I'm starting to use kde plasma (again) so the updates to hyprland part would be slower, but other parts will be updated normally.
 
@@ -26,11 +23,11 @@ pacman -S chezmoi
 2. apply dotfiles
 simply overwrite:
 ```shell
-chezmoi init https://git.envs.net/gb/hyprdots.git && chezmoi apply -v
+chezmoi init https://codeberg.org/grassblock/hyprdots.git && chezmoi apply -v
 ```
 merge maually:
 ```shell
-chezmoi init https://git.envs.net/gb/hyprdots.git && chezmoi merge $FILE
+chezmoi init https://codeberg.org/grassblock/hyprdots.git && chezmoi merge $FILE
 ```
 
 # Dependencies
@@ -47,11 +44,10 @@ chezmoi init https://git.envs.net/gb/hyprdots.git && chezmoi merge $FILE
 - udiskie
 - networkmanager_dmenu
 - gradience-git
-- darkman
 
 # Themes
-- Graphite Nord (Light) | Nordic (Dark) (gtk2/3)
+- Nordic (gtk2/3)
 - gradience nord (gtk4 & libadwaita)
 - Utterly-Nord (qt)
-- papirus (icon)
+- papirus-dark (icon)
 - ~~Nordzy-cursors~~ Bibata-Modern-Ice (cursors)
diff --git a/home/private_dot_config/emacs/spacemacs/init.el b/home/private_dot_config/emacs/spacemacs/init.el
deleted file mode 100644
index deb6d50..0000000
--- a/home/private_dot_config/emacs/spacemacs/init.el
+++ /dev/null
@@ -1,616 +0,0 @@
-;; -*- mode: emacs-lisp; lexical-binding: t -*-
-;; This file is loaded by Spacemacs at startup.
-;; It must be stored in your home directory.
-
-(defun dotspacemacs/layers ()
-  "Layer configuration:
-This function should only modify configuration layer settings."
-  (setq-default
-   ;; Base distribution to use. This is a layer contained in the directory
-   ;; `+distribution'. For now available distributions are `spacemacs-base'
-   ;; or `spacemacs'. (default 'spacemacs)
-   dotspacemacs-distribution 'spacemacs
-
-   ;; Lazy installation of layers (i.e. layers are installed only when a file
-   ;; with a supported type is opened). Possible values are `all', `unused'
-   ;; and `nil'. `unused' will lazy install only unused layers (i.e. layers
-   ;; not listed in variable `dotspacemacs-configuration-layers'), `all' will
-   ;; lazy install any layer that support lazy installation even the layers
-   ;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy
-   ;; installation feature and you have to explicitly list a layer in the
-   ;; variable `dotspacemacs-configuration-layers' to install it.
-   ;; (default 'unused)
-   dotspacemacs-enable-lazy-installation 'unused
-
-   ;; If non-nil then Spacemacs will ask for confirmation before installing
-   ;; a layer lazily. (default t)
-   dotspacemacs-ask-for-lazy-installation t
-
-   ;; List of additional paths where to look for configuration layers.
-   ;; Paths must have a trailing slash (i.e. "~/.mycontribs/")
-   dotspacemacs-configuration-layer-path '()
-
-   ;; List of configuration layers to load.
-   dotspacemacs-configuration-layers
-   '(
-     ;; ----------------------------------------------------------------
-     ;; Example of useful layers you may want to use right away.
-     ;; Uncomment some layer names and press `SPC f e R' (Vim style) or
-     ;; `M-m f e R' (Emacs style) to install them.
-     ;; ----------------------------------------------------------------
-     auto-completion
-     better-defaults
-     emacs-lisp
-     git
-     helm
-     lsp
-     markdown
-     multiple-cursors
-     org
-     ;; (shell :variables
-     ;;        shell-default-height 30
-     ;;        shell-default-position 'bottom)
-     ;; spell-checking
-     ;; syntax-checking
-     ;; version-control
-     treemacs)
-
-
-   ;; List of additional packages that will be installed without being wrapped
-   ;; in a layer (generally the packages are installed only and should still be
-   ;; loaded using load/require/use-package in the user-config section below in
-   ;; this file). If you need some configuration for these packages, then
-   ;; consider creating a layer. You can also put the configuration in
-   ;; `dotspacemacs/user-config'. To use a local version of a package, use the
-   ;; `:location' property: '(your-package :location "~/path/to/your-package/")
-   ;; Also include the dependencies as they will not be resolved automatically.
-   dotspacemacs-additional-packages '(
-                                      wakatime-mode
-                                      nord-theme
-                                      netease-cloud-music
-                                      netease-cloud-music-ui
-                                      netease-cloud-music-donwload-api
-                                      )
-
-   ;; A list of packages that cannot be updated.
-   dotspacemacs-frozen-packages '()
-
-   ;; A list of packages that will not be installed and loaded.
-   dotspacemacs-excluded-packages '()
-
-   ;; Defines the behaviour of Spacemacs when installing packages.
-   ;; Possible values are `used-only', `used-but-keep-unused' and `all'.
-   ;; `used-only' installs only explicitly used packages and deletes any unused
-   ;; packages as well as their unused dependencies. `used-but-keep-unused'
-   ;; installs only the used packages but won't delete unused ones. `all'
-   ;; installs *all* packages supported by Spacemacs and never uninstalls them.
-   ;; (default is `used-only')
-   dotspacemacs-install-packages 'used-only))
-
-(defun dotspacemacs/init ()
-  "Initialization:
-This function is called at the very beginning of Spacemacs startup,
-before layer configuration.
-It should only modify the values of Spacemacs settings."
-  ;; This setq-default sexp is an exhaustive list of all the supported
-  ;; spacemacs settings.
-  (setq-default
-   ;; If non-nil then enable support for the portable dumper. You'll need to
-   ;; compile Emacs 27 from source following the instructions in file
-   ;; EXPERIMENTAL.org at to root of the git repository.
-   ;;
-   ;; WARNING: pdumper does not work with Native Compilation, so it's disabled
-   ;; regardless of the following setting when native compilation is in effect.
-   ;;
-   ;; (default nil)
-   dotspacemacs-enable-emacs-pdumper nil
-
-   ;; Name of executable file pointing to emacs 27+. This executable must be
-   ;; in your PATH.
-   ;; (default "emacs")
-   dotspacemacs-emacs-pdumper-executable-file "emacs"
-
-   ;; Name of the Spacemacs dump file. This is the file will be created by the
-   ;; portable dumper in the cache directory under dumps sub-directory.
-   ;; To load it when starting Emacs add the parameter `--dump-file'
-   ;; when invoking Emacs 27.1 executable on the command line, for instance:
-   ;;   ./emacs --dump-file=$HOME/.emacs.d/.cache/dumps/spacemacs-27.1.pdmp
-   ;; (default (format "spacemacs-%s.pdmp" emacs-version))
-   dotspacemacs-emacs-dumper-dump-file (format "spacemacs-%s.pdmp" emacs-version)
-
-   ;; Maximum allowed time in seconds to contact an ELPA repository.
-   ;; (default 5)
-   dotspacemacs-elpa-timeout 5
-
-   ;; Set `gc-cons-threshold' and `gc-cons-percentage' when startup finishes.
-   ;; This is an advanced option and should not be changed unless you suspect
-   ;; performance issues due to garbage collection operations.
-   ;; (default '(100000000 0.1))
-   dotspacemacs-gc-cons '(100000000 0.1)
-
-   ;; Set `read-process-output-max' when startup finishes.
-   ;; This defines how much data is read from a foreign process.
-   ;; Setting this >= 1 MB should increase performance for lsp servers
-   ;; in emacs 27.
-   ;; (default (* 1024 1024))
-   dotspacemacs-read-process-output-max (* 1024 1024)
-
-   ;; If non-nil then Spacelpa repository is the primary source to install
-   ;; a locked version of packages. If nil then Spacemacs will install the
-   ;; latest version of packages from MELPA. Spacelpa is currently in
-   ;; experimental state please use only for testing purposes.
-   ;; (default nil)
-   dotspacemacs-use-spacelpa nil
-
-   ;; If non-nil then verify the signature for downloaded Spacelpa archives.
-   ;; (default t)
-   dotspacemacs-verify-spacelpa-archives t
-
-   ;; If non-nil then spacemacs will check for updates at startup
-   ;; when the current branch is not `develop'. Note that checking for
-   ;; new versions works via git commands, thus it calls GitHub services
-   ;; whenever you start Emacs. (default nil)
-   dotspacemacs-check-for-update nil
-
-   ;; If non-nil, a form that evaluates to a package directory. For example, to
-   ;; use different package directories for different Emacs versions, set this
-   ;; to `emacs-version'. (default 'emacs-version)
-   dotspacemacs-elpa-subdirectory 'emacs-version
-
-   ;; One of `vim', `emacs' or `hybrid'.
-   ;; `hybrid' is like `vim' except that `insert state' is replaced by the
-   ;; `hybrid state' with `emacs' key bindings. The value can also be a list
-   ;; with `:variables' keyword (similar to layers). Check the editing styles
-   ;; section of the documentation for details on available variables.
-   ;; (default 'vim)
-   dotspacemacs-editing-style 'vim
-
-   ;; If non-nil show the version string in the Spacemacs buffer. It will
-   ;; appear as (spacemacs version)@(emacs version)
-   ;; (default t)
-   dotspacemacs-startup-buffer-show-version t
-
-   ;; Specify the startup banner. Default value is `official', it displays
-   ;; the official spacemacs logo. An integer value is the index of text
-   ;; banner, `random' chooses a random text banner in `core/banners'
-   ;; directory. A string value must be a path to an image format supported
-   ;; by your Emacs build.
-   ;; If the value is nil then no banner is displayed. (default 'official)
-   dotspacemacs-startup-banner 'official
-
-   ;; Scale factor controls the scaling (size) of the startup banner. Default
-   ;; value is `auto' for scaling the logo automatically to fit all buffer
-   ;; contents, to a maximum of the full image height and a minimum of 3 line
-   ;; heights. If set to a number (int or float) it is used as a constant
-   ;; scaling factor for the default logo size.
-   dotspacemacs-startup-banner-scale 'auto
-
-   ;; List of items to show in startup buffer or an association list of
-   ;; the form `(list-type . list-size)`. If nil then it is disabled.
-   ;; Possible values for list-type are:
-   ;; `recents' `recents-by-project' `bookmarks' `projects' `agenda' `todos'.
-   ;; List sizes may be nil, in which case
-   ;; `spacemacs-buffer-startup-lists-length' takes effect.
-   ;; The exceptional case is `recents-by-project', where list-type must be a
-   ;; pair of numbers, e.g. `(recents-by-project . (7 .  5))', where the first
-   ;; number is the project limit and the second the limit on the recent files
-   ;; within a project.
-   dotspacemacs-startup-lists '((recents . 5)
-                                (projects . 7))
-
-   ;; True if the home buffer should respond to resize events. (default t)
-   dotspacemacs-startup-buffer-responsive t
-
-   ;; Show numbers before the startup list lines. (default t)
-   dotspacemacs-show-startup-list-numbers t
-
-   ;; The minimum delay in seconds between number key presses. (default 0.4)
-   dotspacemacs-startup-buffer-multi-digit-delay 0.4
-
-   ;; If non-nil, show file icons for entries and headings on Spacemacs home buffer.
-   ;; This has no effect in terminal or if "all-the-icons" package or the font
-   ;; is not installed. (default nil)
-   dotspacemacs-startup-buffer-show-icons nil
-
-   ;; Default major mode for a new empty buffer. Possible values are mode
-   ;; names such as `text-mode'; and `nil' to use Fundamental mode.
-   ;; (default `text-mode')
-   dotspacemacs-new-empty-buffer-major-mode 'text-mode
-
-   ;; Default major mode of the scratch buffer (default `text-mode')
-   dotspacemacs-scratch-mode 'text-mode
-
-   ;; If non-nil, *scratch* buffer will be persistent. Things you write down in
-   ;; *scratch* buffer will be saved and restored automatically.
-   dotspacemacs-scratch-buffer-persistent nil
-
-   ;; If non-nil, `kill-buffer' on *scratch* buffer
-   ;; will bury it instead of killing.
-   dotspacemacs-scratch-buffer-unkillable nil
-
-   ;; Initial message in the scratch buffer, such as "Welcome to Spacemacs!"
-   ;; (default nil)
-   dotspacemacs-initial-scratch-message nil
-
-   ;; List of themes, the first of the list is loaded when spacemacs starts.
-   ;; Press `SPC T n' to cycle to the next theme in the list (works great
-   ;; with 2 themes variants, one dark and one light)
-   dotspacemacs-themes '(spacemacs-dark
-                         spacemacs-light)
-
-   ;; Set the theme for the Spaceline. Supported themes are `spacemacs',
-   ;; `all-the-icons', `custom', `doom', `vim-powerline' and `vanilla'. The
-   ;; first three are spaceline themes. `doom' is the doom-emacs mode-line.
-   ;; `vanilla' is default Emacs mode-line. `custom' is a user defined themes,
-   ;; refer to the DOCUMENTATION.org for more info on how to create your own
-   ;; spaceline theme. Value can be a symbol or list with additional properties.
-   ;; (default '(spacemacs :separator wave :separator-scale 1.5))
-   dotspacemacs-mode-line-theme '(spacemacs :separator wave :separator-scale 1.5)
-
-   ;; If non-nil the cursor color matches the state color in GUI Emacs.
-   ;; (default t)
-   dotspacemacs-colorize-cursor-according-to-state t
-
-   ;; Default font or prioritized list of fonts. This setting has no effect when
-   ;; running Emacs in terminal. The font set here will be used for default and
-   ;; fixed-pitch faces. The `:size' can be specified as
-   ;; a non-negative integer (pixel size), or a floating-point (point size).
-   ;; Point size is recommended, because it's device independent. (default 10.0)
-   dotspacemacs-default-font '("Source Code Pro"
-                               :size 10.0
-                               :weight normal
-                               :width normal)
-
-   ;; The leader key (default "SPC")
-   dotspacemacs-leader-key "SPC"
-
-   ;; The key used for Emacs commands `M-x' (after pressing on the leader key).
-   ;; (default "SPC")
-   dotspacemacs-emacs-command-key "SPC"
-
-   ;; The key used for Vim Ex commands (default ":")
-   dotspacemacs-ex-command-key ":"
-
-   ;; The leader key accessible in `emacs state' and `insert state'
-   ;; (default "M-m")
-   dotspacemacs-emacs-leader-key "M-m"
-
-   ;; Major mode leader key is a shortcut key which is the equivalent of
-   ;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
-   dotspacemacs-major-mode-leader-key ","
-
-   ;; Major mode leader key accessible in `emacs state' and `insert state'.
-   ;; (default "C-M-m" for terminal mode, "<M-return>" for GUI mode).
-   ;; Thus M-RET should work as leader key in both GUI and terminal modes.
-   ;; C-M-m also should work in terminal mode, but not in GUI mode.
-   dotspacemacs-major-mode-emacs-leader-key (if window-system "<M-return>" "C-M-m")
-
-   ;; These variables control whether separate commands are bound in the GUI to
-   ;; the key pairs `C-i', `TAB' and `C-m', `RET'.
-   ;; Setting it to a non-nil value, allows for separate commands under `C-i'
-   ;; and TAB or `C-m' and `RET'.
-   ;; In the terminal, these pairs are generally indistinguishable, so this only
-   ;; works in the GUI. (default nil)
-   dotspacemacs-distinguish-gui-tab nil
-
-   ;; Name of the default layout (default "Default")
-   dotspacemacs-default-layout-name "Default"
-
-   ;; If non-nil the default layout name is displayed in the mode-line.
-   ;; (default nil)
-   dotspacemacs-display-default-layout nil
-
-   ;; If non-nil then the last auto saved layouts are resumed automatically upon
-   ;; start. (default nil)
-   dotspacemacs-auto-resume-layouts nil
-
-   ;; If non-nil, auto-generate layout name when creating new layouts. Only has
-   ;; effect when using the "jump to layout by number" commands. (default nil)
-   dotspacemacs-auto-generate-layout-names nil
-
-   ;; Size (in MB) above which spacemacs will prompt to open the large file
-   ;; literally to avoid performance issues. Opening a file literally means that
-   ;; no major mode or minor modes are active. (default is 1)
-   dotspacemacs-large-file-size 1
-
-   ;; Location where to auto-save files. Possible values are `original' to
-   ;; auto-save the file in-place, `cache' to auto-save the file to another
-   ;; file stored in the cache directory and `nil' to disable auto-saving.
-   ;; (default 'cache)
-   dotspacemacs-auto-save-file-location 'cache
-
-   ;; Maximum number of rollback slots to keep in the cache. (default 5)
-   dotspacemacs-max-rollback-slots 5
-
-   ;; If non-nil, the paste transient-state is enabled. While enabled, after you
-   ;; paste something, pressing `C-j' and `C-k' several times cycles through the
-   ;; elements in the `kill-ring'. (default nil)
-   dotspacemacs-enable-paste-transient-state nil
-
-   ;; Which-key delay in seconds. The which-key buffer is the popup listing
-   ;; the commands bound to the current keystroke sequence. (default 0.4)
-   dotspacemacs-which-key-delay 0.4
-
-   ;; Which-key frame position. Possible values are `right', `bottom' and
-   ;; `right-then-bottom'. right-then-bottom tries to display the frame to the
-   ;; right; if there is insufficient space it displays it at the bottom.
-   ;; It is also possible to use a posframe with the following cons cell
-   ;; `(posframe . position)' where position can be one of `center',
-   ;; `top-center', `bottom-center', `top-left-corner', `top-right-corner',
-   ;; `top-right-corner', `bottom-left-corner' or `bottom-right-corner'
-   ;; (default 'bottom)
-   dotspacemacs-which-key-position 'bottom
-
-   ;; Control where `switch-to-buffer' displays the buffer. If nil,
-   ;; `switch-to-buffer' displays the buffer in the current window even if
-   ;; another same-purpose window is available. If non-nil, `switch-to-buffer'
-   ;; displays the buffer in a same-purpose window even if the buffer can be
-   ;; displayed in the current window. (default nil)
-   dotspacemacs-switch-to-buffer-prefers-purpose nil
-
-   ;; Whether side windows (such as those created by treemacs or neotree)
-   ;; are kept or minimized by `spacemacs/toggle-maximize-window' (SPC w m).
-   ;; (default t)
-   dotspacemacs-maximize-window-keep-side-windows t
-
-   ;; If non-nil a progress bar is displayed when spacemacs is loading. This
-   ;; may increase the boot time on some systems and emacs builds, set it to
-   ;; nil to boost the loading time. (default t)
-   dotspacemacs-loading-progress-bar t
-
-   ;; If non-nil the frame is fullscreen when Emacs starts up. (default nil)
-   ;; (Emacs 24.4+ only)
-   dotspacemacs-fullscreen-at-startup nil
-
-   ;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
-   ;; Use to disable fullscreen animations in OSX. (default nil)
-   dotspacemacs-fullscreen-use-non-native nil
-
-   ;; If non-nil the frame is maximized when Emacs starts up.
-   ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
-   ;; (default t) (Emacs 24.4+ only)
-   dotspacemacs-maximized-at-startup t
-
-   ;; If non-nil the frame is undecorated when Emacs starts up. Combine this
-   ;; variable with `dotspacemacs-maximized-at-startup' to obtain fullscreen
-   ;; without external boxes. Also disables the internal border. (default nil)
-   dotspacemacs-undecorated-at-startup nil
-
-   ;; A value from the range (0..100), in increasing opacity, which describes
-   ;; the transparency level of a frame when it's active or selected.
-   ;; Transparency can be toggled through `toggle-transparency'. (default 90)
-   dotspacemacs-active-transparency 90
-
-   ;; A value from the range (0..100), in increasing opacity, which describes
-   ;; the transparency level of a frame when it's inactive or deselected.
-   ;; Transparency can be toggled through `toggle-transparency'. (default 90)
-   dotspacemacs-inactive-transparency 90
-
-   ;; A value from the range (0..100), in increasing opacity, which describes the
-   ;; transparency level of a frame background when it's active or selected. Transparency
-   ;; can be toggled through `toggle-background-transparency'. (default 90)
-   dotspacemacs-background-transparency 90
-
-   ;; If non-nil show the titles of transient states. (default t)
-   dotspacemacs-show-transient-state-title t
-
-   ;; If non-nil show the color guide hint for transient state keys. (default t)
-   dotspacemacs-show-transient-state-color-guide t
-
-   ;; If non-nil unicode symbols are displayed in the mode line.
-   ;; If you use Emacs as a daemon and wants unicode characters only in GUI set
-   ;; the value to quoted `display-graphic-p'. (default t)
-   dotspacemacs-mode-line-unicode-symbols t
-
-   ;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth
-   ;; scrolling overrides the default behavior of Emacs which recenters point
-   ;; when it reaches the top or bottom of the screen. (default t)
-   dotspacemacs-smooth-scrolling t
-
-   ;; Show the scroll bar while scrolling. The auto hide time can be configured
-   ;; by setting this variable to a number. (default t)
-   dotspacemacs-scroll-bar-while-scrolling t
-
-   ;; Control line numbers activation.
-   ;; If set to `t', `relative' or `visual' then line numbers are enabled in all
-   ;; `prog-mode' and `text-mode' derivatives. If set to `relative', line
-   ;; numbers are relative. If set to `visual', line numbers are also relative,
-   ;; but only visual lines are counted. For example, folded lines will not be
-   ;; counted and wrapped lines are counted as multiple lines.
-   ;; This variable can also be set to a property list for finer control:
-   ;; '(:relative nil
-   ;;   :visual nil
-   ;;   :disabled-for-modes dired-mode
-   ;;                       doc-view-mode
-   ;;                       markdown-mode
-   ;;                       org-mode
-   ;;                       pdf-view-mode
-   ;;                       text-mode
-   ;;   :size-limit-kb 1000)
-   ;; When used in a plist, `visual' takes precedence over `relative'.
-   ;; (default nil)
-   dotspacemacs-line-numbers nil
-
-   ;; Code folding method. Possible values are `evil', `origami' and `vimish'.
-   ;; (default 'evil)
-   dotspacemacs-folding-method 'evil
-
-   ;; If non-nil and `dotspacemacs-activate-smartparens-mode' is also non-nil,
-   ;; `smartparens-strict-mode' will be enabled in programming modes.
-   ;; (default nil)
-   dotspacemacs-smartparens-strict-mode nil
-
-   ;; If non-nil smartparens-mode will be enabled in programming modes.
-   ;; (default t)
-   dotspacemacs-activate-smartparens-mode t
-
-   ;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
-   ;; over any automatically added closing parenthesis, bracket, quote, etc...
-   ;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
-   dotspacemacs-smart-closing-parenthesis nil
-
-   ;; Select a scope to highlight delimiters. Possible values are `any',
-   ;; `current', `all' or `nil'. Default is `all' (highlight any scope and
-   ;; emphasis the current one). (default 'all)
-   dotspacemacs-highlight-delimiters 'all
-
-   ;; If non-nil, start an Emacs server if one is not already running.
-   ;; (default nil)
-   dotspacemacs-enable-server nil
-
-   ;; Set the emacs server socket location.
-   ;; If nil, uses whatever the Emacs default is, otherwise a directory path
-   ;; like \"~/.emacs.d/server\". It has no effect if
-   ;; `dotspacemacs-enable-server' is nil.
-   ;; (default nil)
-   dotspacemacs-server-socket-dir nil
-
-   ;; If non-nil, advise quit functions to keep server open when quitting.
-   ;; (default nil)
-   dotspacemacs-persistent-server nil
-
-   ;; List of search tool executable names. Spacemacs uses the first installed
-   ;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'.
-   ;; (default '("rg" "ag" "pt" "ack" "grep"))
-   dotspacemacs-search-tools '("rg" "ag" "pt" "ack" "grep")
-
-   ;; The backend used for undo/redo functionality. Possible values are
-   ;; `undo-fu', `undo-redo' and `undo-tree' see also `evil-undo-system'.
-   ;; Note that saved undo history does not get transferred when changing
-   ;; your undo system. The default is currently `undo-fu' as `undo-tree'
-   ;; is not maintained anymore and `undo-redo' is very basic."
-   dotspacemacs-undo-system 'undo-fu
-
-   ;; Format specification for setting the frame title.
-   ;; %a - the `abbreviated-file-name', or `buffer-name'
-   ;; %t - `projectile-project-name'
-   ;; %I - `invocation-name'
-   ;; %S - `system-name'
-   ;; %U - contents of $USER
-   ;; %b - buffer name
-   ;; %f - visited file name
-   ;; %F - frame name
-   ;; %s - process status
-   ;; %p - percent of buffer above top of window, or Top, Bot or All
-   ;; %P - percent of buffer above bottom of window, perhaps plus Top, or Bot or All
-   ;; %m - mode name
-   ;; %n - Narrow if appropriate
-   ;; %z - mnemonics of buffer, terminal, and keyboard coding systems
-   ;; %Z - like %z, but including the end-of-line format
-   ;; If nil then Spacemacs uses default `frame-title-format' to avoid
-   ;; performance issues, instead of calculating the frame title by
-   ;; `spacemacs/title-prepare' all the time.
-   ;; (default "%I@%S")
-   dotspacemacs-frame-title-format "%I@%S"
-
-   ;; Format specification for setting the icon title format
-   ;; (default nil - same as frame-title-format)
-   dotspacemacs-icon-title-format nil
-
-   ;; Color highlight trailing whitespace in all prog-mode and text-mode derived
-   ;; modes such as c++-mode, python-mode, emacs-lisp, html-mode, rst-mode etc.
-   ;; (default t)
-   dotspacemacs-show-trailing-whitespace t
-
-   ;; Delete whitespace while saving buffer. Possible values are `all'
-   ;; to aggressively delete empty line and long sequences of whitespace,
-   ;; `trailing' to delete only the whitespace at end of lines, `changed' to
-   ;; delete only whitespace for changed lines or `nil' to disable cleanup.
-   ;; The variable `global-spacemacs-whitespace-cleanup-modes' controls
-   ;; which major modes have whitespace cleanup enabled or disabled
-   ;; by default.
-   ;; (default nil)
-   dotspacemacs-whitespace-cleanup nil
-
-   ;; If non-nil activate `clean-aindent-mode' which tries to correct
-   ;; virtual indentation of simple modes. This can interfere with mode specific
-   ;; indent handling like has been reported for `go-mode'.
-   ;; If it does deactivate it here.
-   ;; (default t)
-   dotspacemacs-use-clean-aindent-mode t
-
-   ;; Accept SPC as y for prompts if non-nil. (default nil)
-   dotspacemacs-use-SPC-as-y nil
-
-   ;; If non-nil shift your number row to match the entered keyboard layout
-   ;; (only in insert state). Currently supported keyboard layouts are:
-   ;; `qwerty-us', `qwertz-de' and `querty-ca-fr'.
-   ;; New layouts can be added in `spacemacs-editing' layer.
-   ;; (default nil)
-   dotspacemacs-swap-number-row nil
-
-   ;; Either nil or a number of seconds. If non-nil zone out after the specified
-   ;; number of seconds. (default nil)
-   dotspacemacs-zone-out-when-idle nil
-
-   ;; Run `spacemacs/prettify-org-buffer' when
-   ;; visiting README.org files of Spacemacs.
-   ;; (default nil)
-   dotspacemacs-pretty-docs nil
-
-   ;; If nil the home buffer shows the full path of agenda items
-   ;; and todos. If non-nil only the file name is shown.
-   dotspacemacs-home-shorten-agenda-source nil
-
-   ;; If non-nil then byte-compile some of Spacemacs files.
-   dotspacemacs-byte-compile nil))
-
-(defun dotspacemacs/user-env ()
-  "Environment variables setup.
-This function defines the environment variables for your Emacs session. By
-default it calls `spacemacs/load-spacemacs-env' which loads the environment
-variables declared in `~/.spacemacs.env' or `~/.spacemacs.d/.spacemacs.env'.
-See the header of this file for more information."
-  (spacemacs/load-spacemacs-env)
-  )
-
-(defun dotspacemacs/user-init ()
-  "Initialization for user code:
-This function is called immediately after `dotspacemacs/init', before layer
-configuration.
-It is mostly for variables that should be set before packages are loaded.
-If you are unsure, try setting them in `dotspacemacs/user-config' first."
-  (setq-default dotspacemacs-themes '(nord))
-  )
-
-
-(defun dotspacemacs/user-load ()
-  "Library to load while dumping.
-This function is called only while dumping Spacemacs configuration. You can
-`require' or `load' the libraries of your choice that will be included in the
-dump."
-  )
-
-
-(defun dotspacemacs/user-config ()
-  "Configuration for user code:
-This function is called at the very end of Spacemacs startup, after layer
-configuration.
-Put your configuration code here, except for variables that should be set
-before packages are loaded."
-  (global-wakatime-mode)
-  (require 'netease-cloud-music-ui)
-  )
-
-
-;; Do not write anything past this comment. This is where Emacs will
-;; auto-generate custom variable definitions.
-(defun dotspacemacs/emacs-custom-settings ()
-  "Emacs custom settings.
-This is an auto-generated function, do not modify its content directly, use
-Emacs customize menu instead.
-This function is called at the very end of Spacemacs initialization."
-  (custom-set-variables
-   ;; custom-set-variables was added by Custom.
-   ;; If you edit it by hand, you could mess it up, so be careful.
-   ;; Your init file should contain only one such instance.
-   ;; If there is more than one, they won't work right.
-   '(package-selected-packages
-     '(nord-theme netease-cloud-music wakatime-mode ws-butler writeroom-mode winum which-key vundo volatile-highlights vim-powerline vi-tilde-fringe uuidgen undo-fu-session undo-fu treemacs-projectile treemacs-persp treemacs-icons-dired treemacs-evil toc-org term-cursor symon symbol-overlay string-inflection string-edit-at-point spacemacs-whitespace-cleanup spacemacs-purpose-popwin spaceline space-doc restart-emacs request rainbow-delimiters quickrun popwin pcre2el password-generator paradox overseer org-superstar open-junk-file nameless multi-line macrostep lorem-ipsum link-hint inspector info+ indent-guide hybrid-mode hungry-delete holy-mode hl-todo highlight-parentheses highlight-numbers highlight-indentation hide-comnt helm-xref helm-themes helm-swoop helm-purpose helm-projectile helm-org helm-mode-manager helm-make helm-descbinds helm-comint helm-ag google-translate golden-ratio flycheck-package flycheck-elsa flx-ido fancy-battery eyebrowse expand-region evil-visualstar evil-visual-mark-mode evil-unimpaired evil-tutor evil-textobj-line evil-surround evil-numbers evil-nerd-commenter evil-mc evil-matchit evil-lisp-state evil-lion evil-indent-plus evil-iedit-state evil-goggles evil-exchange evil-evilified-state evil-escape evil-easymotion evil-collection evil-cleverparens evil-args evil-anzu eval-sexp-fu emr elisp-slime-nav elisp-demos elisp-def editorconfig dumb-jump drag-stuff dotenv-mode disable-mouse dired-quick-sort diminish devdocs define-word column-enforce-mode clean-aindent-mode centered-cursor-mode auto-highlight-symbol auto-compile all-the-icons aggressive-indent ace-link ace-jump-helm-line)))
-  (custom-set-faces
-   ;; custom-set-faces was added by Custom.
-   ;; If you edit it by hand, you could mess it up, so be careful.
-   ;; Your init file should contain only one such instance.
-   ;; If there is more than one, they won't work right.
-   )
-  )
diff --git a/home/private_dot_config/environment.d/envvars.conf b/home/private_dot_config/environment.d/envvars.conf
deleted file mode 100644
index 1e1dc7c..0000000
--- a/home/private_dot_config/environment.d/envvars.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-#QT_STYLE_OVERRIDE=kvantum
-MOZ_ENABLE_WAYLAND=1
-QT_QPA_PLATFORM=wayland;xcb
-#XCURSOR_THEME=Bibata-Modern-Ice
-#XCURSOR_SIZE=24
-SDL_VIDEODRIVER=wayland
-GDK_BACKEND=wayland,x11,*
-QT_SCALE_FACTOR_ROUNDING_POLICY=RoundPreferFloor
-SSH_AUTH_SOCK=$XDG_RUNTIME_DIR/ssh-agent.socket
-# make gtk render in opengl to fix error 71
-# so gnome f**k you
-GSK_RENDERER=gl
diff --git a/home/private_dot_config/environment.d/xdg.conf b/home/private_dot_config/environment.d/xdg.conf
index 81a6281..3e9d1fa 100644
--- a/home/private_dot_config/environment.d/xdg.conf
+++ b/home/private_dot_config/environment.d/xdg.conf
@@ -14,20 +14,12 @@ CARGO_HOME="$XDG_DATA_HOME"/cargo
 CUDA_CACHE_PATH="$XDG_CACHE_HOME"/nv
 # gradle
 GRADLE_USER_HOME="$XDG_DATA_HOME"/gradle
-# gtk-2.0
-GTK2_RC_FILES="$XDG_CONFIG_HOME"/gtk-2.0/gtkrc
-# gnupg
-GNUPGHOME="$XDG_DATA_HOME"/gnupg
 # java
 _JAVA_OPTIONS="-Djava.util.prefs.userRoot=${XDG_CONFIG_HOME}/java -Djavafx.cachedir=${XDG_CACHE_HOME}/openjfx"
-# npm
-NPM_CONFIG_USERCONFIG="$XDG_CONFIG_HOME"/npm/npmrc
 # platformio
 PLATFORMIO_CORE_DIR="$XDG_DATA_HOME"/platformio
 # python (before v3.13.0,still beta)
 PYTHONSTARTUP="$XDG_CONFIG_HOME"/python/pythonrc
-# spacemacs
-SPACEMACSDIR="$XDG_CONFIG_HOME"/emacs/spacemacs
 # teamspeak
 TS3_CONFIG_DIR=$XDG_CONFIG_HOME/ts3client
 # wakatime
diff --git a/home/private_dot_config/kitty/themes.conf b/home/private_dot_config/kitty/themes.conf
index b4f80c1..55b3906 100644
--- a/home/private_dot_config/kitty/themes.conf
+++ b/home/private_dot_config/kitty/themes.conf
@@ -1,7 +1,7 @@
 # vim:fileencoding=utf-8:foldmethod=marker
 
 # BEGIN_KITTY_THEME
-# Nord-Dark
+# Nord
 include current-theme.conf
 # END_KITTY_THEME
 
diff --git a/home/private_dot_config/kitty/themes/nord-dark.conf b/home/private_dot_config/kitty/themes/nord-dark.conf
deleted file mode 100644
index 54f3a96..0000000
--- a/home/private_dot_config/kitty/themes/nord-dark.conf
+++ /dev/null
@@ -1,43 +0,0 @@
-# Nord Colorscheme for Kitty
-# Based on:
-# - https://gist.github.com/marcusramberg/64010234c95a93d953e8c79fdaf94192
-# - https://github.com/arcticicestudio/nord-hyper
-
-foreground            #D8DEE9
-background            #2E3440
-selection_foreground  #000000
-selection_background  #FFFACD
-url_color             #0087BD
-cursor                #81A1C1
-
-# black
-color0   #3B4252
-color8   #4C566A
-
-# red
-color1   #BF616A
-color9   #BF616A
-
-# green
-color2   #A3BE8C
-color10  #A3BE8C
-
-# yellow
-color3   #EBCB8B
-color11  #EBCB8B
-
-# blue
-color4  #81A1C1
-color12 #81A1C1
-
-# magenta
-color5   #B48EAD
-color13  #B48EAD
-
-# cyan
-color6   #88C0D0
-color14  #8FBCBB
-
-# white
-color7   #E5E9F0
-color15  #ECEFF4
diff --git a/home/private_dot_config/kitty/themes/nord-light.conf b/home/private_dot_config/kitty/themes/nord-light.conf
deleted file mode 100644
index 85c1cbd..0000000
--- a/home/private_dot_config/kitty/themes/nord-light.conf
+++ /dev/null
@@ -1,42 +0,0 @@
-
-# Nord Light Colorscheme for Kitty
-# Converted from Nord Dark theme
-
-foreground            #2E3440
-background            #ECEFF4
-selection_foreground  #FFFFFF
-selection_background  #4C566A
-url_color             #005F87
-cursor                #2E3440
-
-# black
-color0   #D8DEE9
-color8   #E5E9F0
-
-# red
-color1   #BF616A
-color9   #D08770
-
-# green
-color2   #A3BE8C
-color10  #B5D99C
-
-# yellow
-color3   #EBCB8B
-color11  #F3E8B8
-
-# blue
-color4  #81A1C1
-color12 #88C0D0
-
-# magenta
-color5   #B48EAD
-color13  #D4A5C5
-
-# cyan
-color6   #8FBCBB
-color14  #A3D6D5
-
-# white
-color7   #4C566A
-color15  #2E3440
diff --git a/home/private_dot_config/nvim/lua/custom/README.md b/home/private_dot_config/nvim/lua/custom/README.md
deleted file mode 100644
index a6ef0d1..0000000
--- a/home/private_dot_config/nvim/lua/custom/README.md
+++ /dev/null
@@ -1,3 +0,0 @@
-# Example_config
-
-This can be used as an example custom config for NvChad, this branch is a minimal one. Do check the feature_full branch if you need all the ease in your config.
diff --git a/home/private_dot_config/nvim/lua/custom/chadrc.lua b/home/private_dot_config/nvim/lua/custom/chadrc.lua
deleted file mode 100644
index 8989328..0000000
--- a/home/private_dot_config/nvim/lua/custom/chadrc.lua
+++ /dev/null
@@ -1,39 +0,0 @@
----@type ChadrcConfig
-local M = {}
-
--- Path to overriding theme and highlights files
-local highlights = require "custom.highlights"
-
-local is_darkmode = vim.system({"darkman","get"}, { text = true }, on_exit)
-  if is_darkmode == "dark" then
-    local c_theme = "nord"
-  else
-    local c_theme = "onenord_light"
-  end
-
-M.ui = {
-  theme = c_theme,
-  theme_toggle = { "nord", "onenord_light" },
-
-  hl_override = highlights.override,
-  hl_add = highlights.add,
-
-  nvdash = {
-    load_on_startup = true,
-    -- generated with https://patorjk.com/software/taag/#
-    header = {
-      "▗▖  ▗▖▗▄▄▄▖ ▗▄▖ ▗▖  ▗▖▗▄▄▄▖▗▖  ▗▖",
-      "▐▛▚▖▐▌▐▌   ▐▌ ▐▌▐▌  ▐▌  █  ▐▛▚▞▜▌",
-      "▐▌ ▝▜▌▐▛▀▀▘▐▌ ▐▌▐▌  ▐▌  █  ▐▌  ▐▌",
-      "▐▌  ▐▌▐▙▄▄▖▝▚▄▞▘ ▝▚▞▘ ▗▄█▄▖▐▌  ▐▌",
-      "                                 ",
-    }
-  }
-}
-
-M.plugins = "custom.plugins"
-
--- check core.mappings for table structure
-M.mappings = require "custom.mappings"
-
-return M
diff --git a/home/private_dot_config/nvim/lua/custom/configs/lspconfig.lua b/home/private_dot_config/nvim/lua/custom/configs/lspconfig.lua
deleted file mode 100644
index d6f7f2b..0000000
--- a/home/private_dot_config/nvim/lua/custom/configs/lspconfig.lua
+++ /dev/null
@@ -1,17 +0,0 @@
-local on_attach = require("plugins.configs.lspconfig").on_attach
-local capabilities = require("plugins.configs.lspconfig").capabilities
-
-local lspconfig = require "lspconfig"
-
--- if you just want default config for the servers then put them in a table
-local servers = { "html", "cssls", "tsserver", "clangd" }
-
-for _, lsp in ipairs(servers) do
-  lspconfig[lsp].setup {
-    on_attach = on_attach,
-    capabilities = capabilities,
-  }
-end
-
--- 
--- lspconfig.pyright.setup { blabla}
diff --git a/home/private_dot_config/nvim/lua/custom/configs/null-ls.lua b/home/private_dot_config/nvim/lua/custom/configs/null-ls.lua
deleted file mode 100644
index 99cdbf1..0000000
--- a/home/private_dot_config/nvim/lua/custom/configs/null-ls.lua
+++ /dev/null
@@ -1,21 +0,0 @@
-local null_ls = require "null-ls"
-
-local b = null_ls.builtins
-
-local sources = {
-
-  -- webdev stuff
-  b.formatting.deno_fmt, -- choosed deno for ts/js files cuz its very fast!
-  b.formatting.prettier.with { filetypes = { "html", "markdown", "css" } }, -- so prettier works only on these filetypes
-
-  -- Lua
-  b.formatting.stylua,
-
-  -- cpp
-  b.formatting.clang_format,
-}
-
-null_ls.setup {
-  debug = true,
-  sources = sources,
-}
diff --git a/home/private_dot_config/nvim/lua/custom/configs/overrides.lua b/home/private_dot_config/nvim/lua/custom/configs/overrides.lua
deleted file mode 100644
index 8eeb9b2..0000000
--- a/home/private_dot_config/nvim/lua/custom/configs/overrides.lua
+++ /dev/null
@@ -1,62 +0,0 @@
-local M = {}
-
-M.treesitter = {
-  ensure_installed = {
-    "vim",
-    "lua",
-    "html",
-    "css",
-    "javascript",
-    "typescript",
-    "tsx",
-    "c",
-    "markdown",
-    "markdown_inline",
-  },
-  indent = {
-    enable = true,
-    -- disable = {
-    --   "python"
-    -- },
-  },
-}
-
-M.mason = {
-  ensure_installed = {
-    -- lua stuff
-    "lua-language-server",
-    "stylua",
-
-    -- web dev stuff
-    "css-lsp",
-    "html-lsp",
-    "typescript-language-server",
-    "deno",
-    "prettier",
-
-    -- c/cpp stuff
-    "clangd",
-    "clang-format",
-    
-    -- python
-    "python-lsp-server"
-  },
-}
-
--- git support in nvimtree
-M.nvimtree = {
-  git = {
-    enable = true,
-  },
-
-  renderer = {
-    highlight_git = true,
-    icons = {
-      show = {
-        git = true,
-      },
-    },
-  },
-}
-
-return M
diff --git a/home/private_dot_config/nvim/lua/custom/highlights.lua b/home/private_dot_config/nvim/lua/custom/highlights.lua
deleted file mode 100644
index ebf2dfb..0000000
--- a/home/private_dot_config/nvim/lua/custom/highlights.lua
+++ /dev/null
@@ -1,19 +0,0 @@
--- To find any highlight groups: "<cmd> Telescope highlights"
--- Each highlight group can take a table with variables fg, bg, bold, italic, etc
--- base30 variable names can also be used as colors
-
-local M = {}
-
----@type Base46HLGroupsList
-M.override = {
-  Comment = {
-    italic = true,
-  },
-}
-
----@type HLTable
-M.add = {
-  NvimTreeOpenedFolderName = { fg = "green", bold = true },
-}
-
-return M
diff --git a/home/private_dot_config/nvim/lua/custom/init.lua b/home/private_dot_config/nvim/lua/custom/init.lua
deleted file mode 100644
index 608a8d9..0000000
--- a/home/private_dot_config/nvim/lua/custom/init.lua
+++ /dev/null
@@ -1,7 +0,0 @@
--- local autocmd = vim.api.nvim_create_autocmd
-
--- Auto resize panes when resizing nvim window
--- autocmd("VimResized", {
---   pattern = "*",
---   command = "tabdo wincmd =",
--- })
diff --git a/home/private_dot_config/nvim/lua/custom/mappings.lua b/home/private_dot_config/nvim/lua/custom/mappings.lua
deleted file mode 100644
index 9ce068a..0000000
--- a/home/private_dot_config/nvim/lua/custom/mappings.lua
+++ /dev/null
@@ -1,12 +0,0 @@
----@type MappingsTable
-local M = {}
-
-M.general = {
-  n = {
-    [";"] = { ":", "enter command mode", opts = { nowait = true } },
-  },
-}
-
--- more keybinds!
-
-return M
diff --git a/home/private_dot_config/nvim/lua/custom/plugins.lua b/home/private_dot_config/nvim/lua/custom/plugins.lua
deleted file mode 100644
index 806fd7e..0000000
--- a/home/private_dot_config/nvim/lua/custom/plugins.lua
+++ /dev/null
@@ -1,76 +0,0 @@
-local overrides = require("custom.configs.overrides")
-
----@type NvPluginSpec[]
-local plugins = {
-
-  -- Override plugin definition options
-
-  {
-    "neovim/nvim-lspconfig",
-    dependencies = {
-      -- format & linting
-      {
-        "jose-elias-alvarez/null-ls.nvim",
-        config = function()
-          require "custom.configs.null-ls"
-        end,
-      },
-    },
-    config = function()
-      require "plugins.configs.lspconfig"
-      require "custom.configs.lspconfig"
-    end, -- Override to setup mason-lspconfig
-  },
-
-  -- override plugin configs
-  {
-    "williamboman/mason.nvim",
-    opts = overrides.mason,
-  },
-
-  {
-    "nvim-treesitter/nvim-treesitter",
-    opts = overrides.treesitter,
-  },
-
-  {
-    "nvim-tree/nvim-tree.lua",
-    opts = overrides.nvimtree,
-  },
-
-  -- Install a plugin
-  {
-    "max397574/better-escape.nvim",
-    event = "InsertEnter",
-    config = function()
-      require("better_escape").setup()
-    end,
-  },
-
-  {
-  "zbirenbaum/copilot.lua",
-  cmd = "Copilot",
-  event = "InsertEnter",
-  config = function()
-    require("copilot").setup({})
-  end,
-  },
-
-  { 'wakatime/vim-wakatime', lazy = false }
-
-  -- To make a plugin not be loaded
-  -- {
-  --   "NvChad/nvim-colorizer.lua",
-  --   enabled = false
-  -- },
-
-  -- All NvChad plugins are lazy-loaded by default
-  -- For a plugin to be loaded, you will need to set either `ft`, `cmd`, `keys`, `event`, or set `lazy = false`
-  -- If you want a plugin to load on startup, add `lazy = false` to a plugin spec, for example
-  -- {
-  --   "mg979/vim-visual-multi",
-  --   lazy = false,
-  -- }
-}
-
-return plugins
diff --git a/home/private_dot_config/private_fish/config.fish b/home/private_dot_config/private_fish/config.fish
index 9f75561..206e53e 100644
--- a/home/private_dot_config/private_fish/config.fish
+++ b/home/private_dot_config/private_fish/config.fish
@@ -1,12 +1,5 @@
 if status is-interactive
     # Commands to run in interactive sessions can go here
-
-    # set theme
-    if string match -q -- light (darkman get)
-      yes | fish_config theme save "ayu Light"
-    else
-      yes | fish_config theme save "Nord"
-    end
 end
 
 # zellij init for alacritty
@@ -23,7 +16,6 @@ starship init fish | source
 # greeting
 function fish_greeting
   echo ""
-# custom motd by fastfetch
   if [ $TERM = xterm-kitty ]
     fastfetch -c $__fish_config_dir/fmotd/motd.jsonc
   else
@@ -33,7 +25,6 @@ function fish_greeting
   #cat $__fish_config_dir/motd
 end
 # greeting end
-
 # pnpm
 set -gx PNPM_HOME "/home/grassblock/.local/share/pnpm"
 if not string match -q -- $PNPM_HOME $PATH
@@ -41,9 +32,6 @@ if not string match -q -- $PNPM_HOME $PATH
 end
 # pnpm end
 
-# nvm managed npm
-set -gx PATH "/home/grassblock/.local/share/npm/bin" $PATH
-
 # ssh-agent
 #set SSH_ENV_FILE "$HOME/.ssh/agent-environment"
 #set SSH_TIMEOUT 86400 # 24 hours in seconds
@@ -64,10 +52,7 @@ set -gx PATH "/home/grassblock/.local/share/npm/bin" $PATH
 #    ssh_start_agent
 #end
 ## ssh-agent-end
-
-# ssh agent with rbw
-set -gx SSH_ASKPASS_REQUIRE prefer
-set -gx SSH_ASKPASS "$HOME/.local/bin/bw-askpass"
+rvm default
 
 # Created by `pipx` on 2023-10-13 01:41:55
 set PATH $PATH /home/grassblock/.local/bin
@@ -79,18 +64,3 @@ set -gx MAMBA_EXE "/usr/bin/micromamba"
 set -gx MAMBA_ROOT_PREFIX "/home/grassblock/.local/share/micromamba"
 $MAMBA_EXE shell hook --shell fish --root-prefix $MAMBA_ROOT_PREFIX | source
 # <<< mamba initialize <<<
-# micromamba has outdated dependency,,,,
-
-# asdf
-set -gx ASDF_CONFIG_FILE $XDG_CONFIG_HOME/asdf/asdfrc
-set -gx ASDF_DATA_DIR $XDG_DATA_HOME/asdf
-source /opt/asdf-vm/asdf.fish
-# asdf end
-
-# alias
-alias wget "wget --hsts-file="$XDG_DATA_HOME/wget-hsts""
-alias "yarn" "yarn $1 --use-yarnrc $XDG_CONFIG_HOME/yarn/config"
-alias "ssh" "kitten ssh"
-alias "nya" "echo nya && meow"
-alias bat="bat --theme=\$( test $(darkman get) = 'dark' && echo Nord || echo ansi)"
-# alias end
diff --git a/home/private_dot_config/private_fish/themes/Nord Light.theme b/home/private_dot_config/private_fish/themes/Nord Light.theme
deleted file mode 100644
index 3537e7f..0000000
--- a/home/private_dot_config/private_fish/themes/Nord Light.theme	
+++ /dev/null
@@ -1,37 +0,0 @@
-# name: Nord Light
-# license: 'MIT'
-# preferred_background: #d8dee9
-# url: https://www.nordtheme.com
-# tweaked from official Nord (WIP)
-
-fish_color_normal normal
-fish_color_command 5e81ac
-fish_color_keyword 3b4252
-fish_color_quote 2e3440
-fish_color_redirection b48ead --bold
-fish_color_end 3b4252
-fish_color_error bf616a
-fish_color_param 4c566a
-fish_color_valid_path --underline
-fish_color_option 81a1c1
-fish_color_comment 4c566a --italics
-fish_color_selection 4c566a --bold --background=d8dee9
-fish_color_operator 81a1c1
-fish_color_escape ebcb8b
-fish_color_autosuggestion 3b4252
-fish_color_cwd 5e81ac
-fish_color_cwd_root bf616a
-fish_color_user 81a1c1
-fish_color_host 81a1c1
-fish_color_host_remote ebcb8b
-fish_color_status bf616a
-fish_color_cancel --reverse
-fish_color_match --background=d08770
-fish_color_search_match --bold --background=d8dee9
-fish_color_history_current 3b4252 --bold
-
-fish_pager_color_progress ffffff --background=d08770
-fish_pager_color_completion 3b4252
-fish_pager_color_prefix normal --bold --underline
-fish_pager_color_description ebcb8b --italics
-fish_pager_color_selected_background --background=d8dee9
diff --git a/home/private_dot_local/private_share/dark-mode.d/executable_desktop-notification.sh b/home/private_dot_local/private_share/dark-mode.d/executable_desktop-notification.sh
deleted file mode 100644
index e29e357..0000000
--- a/home/private_dot_local/private_share/dark-mode.d/executable_desktop-notification.sh
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/usr/bin/env bash
-
-# trigger a small, passive popup dialog to inform the user about darkman's activity
-# reference https://wiki.archlinux.org/title/Desktop_notifications#Usage_in_programming
-
-notify-send --app-name="darkman" --urgency=low --icon=weather-clear-night "switching to dark mode"
\ No newline at end of file
diff --git a/home/private_dot_local/private_share/dark-mode.d/executable_global-theme.sh b/home/private_dot_local/private_share/dark-mode.d/executable_global-theme.sh
deleted file mode 100644
index 5a01aa6..0000000
--- a/home/private_dot_local/private_share/dark-mode.d/executable_global-theme.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/usr/bin/env bash
-
-# Change the global Plasma Theme. On Manjaro you can use "org.manjaro.breath-dark.desktop" 
-# or you can create your own global Plasma Theme with the "Plasma Look And Feel Explorer".
-# Reference: https://userbase.kde.org/Plasma/Create_a_Global_Theme_Package
-#
-# Since Plasma 5.26 the lookandfeeltool does not work anymore without "faking" the screen.
-# Reference: https://bugs.kde.org/show_bug.cgi?id=460643
-
-# Global Theme
-lookandfeeltool -platform offscreen --apply "Utterly-Nord"
-
-# Window decoration
-# https://askubuntu.com/questions/1183294/switching-plasma-theme-from-the-command-line
-kwriteconfig6 --file ~/.config/kwinrc --group org.kde.kdecoration2 --key library org.kde.klassy
-
-kwriteconfig6 --file ~/.config/kwinrc --group org.kde.kdecoration2 --key theme Klassy
-
-# Icon theme
-/usr/lib/plasma-changeicons Papirus-Dark
-
-# gtk4 theme
-flatpak run --command="gradience-cli" com.github.GradienceTeam.Gradience apply -n "Nord-bluish" --gtk gtk4
-
-# application style
-# https://reddit.com/r/kde/comments/f7wemr/how_change_application_style_without_system/
-kwriteconfig6 --file kdeglobals --group KDE --key widgetStyle Lightly
-
-# cursorTheme
-# https://askubuntu.com/questions/1025338/how-can-i-set-the-cursor-theme-on-kde-plasma-5-programmatically
-kwriteconfig6 --file ~/.config/kcminputrc --group Mouse --key cursorTheme Bibata-Modern-Ice
-
-# notify
-notify-send --app-name="darkman" --urgency=low --icon=weather-clear "theme switch success. to make them fully take effect, please logout and login again."
diff --git a/home/private_dot_local/private_share/dark-mode.d/executable_kde-gtk-theme.sh b/home/private_dot_local/private_share/dark-mode.d/executable_kde-gtk-theme.sh
deleted file mode 100644
index 49132ee..0000000
--- a/home/private_dot_local/private_share/dark-mode.d/executable_kde-gtk-theme.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/usr/bin/env bash
-
-# GTK apps are not affected by the Plasma Global Theme, which only applies to Qt based programs.
-# GTK themes can be installed here: Global Theme > Application Style > Configure GNOME/GTK Application Style.
-# Reference: https://wiki.archlinux.org/title/Uniform_look_for_Qt_and_GTK_applications
-
-dbus-send --session --dest=org.kde.GtkConfig --type=method_call /GtkConfig org.kde.GtkConfig.setGtkTheme "string:Nordic-bluish-dark"
diff --git a/home/private_dot_local/private_share/dark-mode.d/executable_kitty.sh b/home/private_dot_local/private_share/dark-mode.d/executable_kitty.sh
deleted file mode 100644
index 219901b..0000000
--- a/home/private_dot_local/private_share/dark-mode.d/executable_kitty.sh
+++ /dev/null
@@ -1,2 +0,0 @@
-#!/usr/bin/env bash
-kitten themes --config-file-name=themes.conf --reload-in=all "nord-dark"
diff --git a/home/private_dot_local/private_share/light-mode.d/executable_desktop-notification.sh b/home/private_dot_local/private_share/light-mode.d/executable_desktop-notification.sh
deleted file mode 100644
index 160edde..0000000
--- a/home/private_dot_local/private_share/light-mode.d/executable_desktop-notification.sh
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/usr/bin/env bash
-
-# trigger a small, passive popup dialog to inform the user about darkman's activity
-# reference https://wiki.archlinux.org/title/Desktop_notifications#Usage_in_programming
-
-notify-send --app-name="darkman" --urgency=low --icon=weather-clear "switching to light mode"
\ No newline at end of file
diff --git a/home/private_dot_local/private_share/light-mode.d/executable_global-theme.sh b/home/private_dot_local/private_share/light-mode.d/executable_global-theme.sh
deleted file mode 100644
index 4f0afd7..0000000
--- a/home/private_dot_local/private_share/light-mode.d/executable_global-theme.sh
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-# Change the global Plasma Theme. On Manjaro you can use "org.manjaro.breath-light.desktop" 
-# or you can create your own global Plasma Theme with the "Plasma Look And Feel Explorer".
-# Reference: https://userbase.kde.org/Plasma/Create_a_Global_Theme_Package
-#
-# Since Plasma 5.26 the lookandfeeltool does not work anymore without "faking" the screen.
-# Reference: https://bugs.kde.org/show_bug.cgi?id=460643
-
-# Global Theme
-lookandfeeltool -platform offscreen --apply "Utterly-Nord-Light"
-
-# Window decoration
-# https://askubuntu.com/questions/1183294/switching-plasma-theme-from-the-command-line
-kwriteconfig6 --file ~/.config/kwinrc --group org.kde.kdecoration2 --key library org.kde.klassy
-
-kwriteconfig6 --file ~/.config/kwinrc --group org.kde.kdecoration2 --key theme Klassy
-
-# Icon theme
-/usr/lib/plasma-changeicons Papirus-Light
-
-# gtk4 theme
-flatpak run --command="gradience-cli" com.github.GradienceTeam.Gradience apply -n "Nord Semi-Light" --gtk gtk4
-
-# application style
-kwriteconfig6 --file kdeglobals --group KDE --key widgetStyle Lightly
-
-# notify
-notify-send --app-name="darkman" --urgency=low --icon=weather-clear "theme switch success. to make them fully take effect, please logout and login again."
diff --git a/home/private_dot_local/private_share/light-mode.d/executable_kde-gtk-theme.sh b/home/private_dot_local/private_share/light-mode.d/executable_kde-gtk-theme.sh
deleted file mode 100644
index 4769819..0000000
--- a/home/private_dot_local/private_share/light-mode.d/executable_kde-gtk-theme.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/usr/bin/env bash
-
-# GTK apps are not affected by the Plasma Global Theme, which only applies to Qt based programs.
-# GTK themes can be installed here: Global Theme > Application Style > Configure GNOME/GTK Application Style.
-# Reference: https://wiki.archlinux.org/title/Uniform_look_for_Qt_and_GTK_applications
-
-dbus-send --session --dest=org.kde.GtkConfig --type=method_call /GtkConfig org.kde.GtkConfig.setGtkTheme "string:Graphite-Light-nord"
diff --git a/home/private_dot_local/private_share/light-mode.d/executable_kitty.sh b/home/private_dot_local/private_share/light-mode.d/executable_kitty.sh
deleted file mode 100644
index f4f4910..0000000
--- a/home/private_dot_local/private_share/light-mode.d/executable_kitty.sh
+++ /dev/null
@@ -1,2 +0,0 @@
-#!/usr/bin/env bash
-kitten themes --config-file-name=themes.conf "nord-light"